NVR Operation > Network Setup > PPPoE

Network Setup > PPPoE

Use the PPPoE Menu to configure the NVR’s PPPoE network settings.

 

  1. PPPoE Function – Select this option if you wish to connect to the NVR by PPPoE protocols.
  2. Username – Enter your PPPoE username
  3. Password – Enter your PPPoE password
  4. PPPoE Status – If PPPoE is enabled, this will display its connection status.
  5. PPPoE IP – The IP address provided by your PPPoE connection.

Back to – Table of Contents

Next Page – Network Setup > 3G