NVR Operation > Channel Setup > PTZ Setup

PTZ Setup

The PTZ Setup menu allows you to configure the PTZ camera’s Tour and Protocol, so that you’re able to better customize the footage the PTZ camera captures.

 

1. Channel – Select the PTZ Channel from the drop down menu.
2. Protocol – Displays the network protocol for the PTZ camera.
3. Tour Position List – Configure the path your PTZ camera will follow when touring is enabled.
   1. 0/32 – Shows which position the row is referencing.
   2. Preset – Shows which preset the PTZ will reference.
   3. Keep Time – Shows how long the PTZ camera will hold at that specific position.
4. Add – Add the chosen preset to the Tour Position List.
   1. Preset – Choose which preset position you want to add to the tour.
   2. Keep Time – Select how long the PTZ camera will hold at that specific position.
5. Update – Update the selected position from the Tour Position List.
6. Remove – Remove the selected position from the Tour Position List.
7. Copy to – Copy your settings to an attached USB device.

Back to – Table of Contents

Next Page – Channel Setup > Channel OSD