Site icon Zosi Blog

Connecting the Cameras to the NVR – NVR Installation

Zosi NVR Installation – Connecting the Cameras to the NVR

 

 

 

Ensure the NVR is powered on, and is located within 3m of the cameras you wish to add.

Connect the AC power connection to the camera’s power input, and ensure the camera is being plugged into an active power outlet.

On the NVR itself, right click on the mouse to reveal the Quick Menu

From the Quick Menu, select IPC Channel Config, as seen below:

 

Once the IPC Channel Config menu appears, you should see any powered cameras listed in the top menu, as seen below.

Select the “Wifi Add” option to add the cameras to your NVR.

 

Once you select the “Wifi Add” option, the information in the top panel, will move to the bottom panel, and you’ll see the “Connected” message in the right hand column, labelled Connection Status.

 

Back To – Table of Contents

Next Page – Zosi NVR Instructions – Connecting the DVR to an HDMI Monitor

Exit mobile version