Record Setup > Record Plan
The Record Plan screen is used to schedule your recordings over the week. It is defaulted to record 24/7 as seen below.
Use the grid to select which times you would like to record.
The left column shows the day of the week, while the top row shows the hours in a 24-hour format, with 0 representing 12:00 Midnight.
Select your channel from the Channel drop down menu.
Select the Time, Motion, or Alarm icon and draw in the grid for the hours you want that type of schedule to be active.
- Time – The NVR will record everything that happens for that scheduled time.
- Motion – The NVR will begin recording when motion is detected and stop shortly after the motion ends.
- Alarm – If you have an external alarm connected, you can schedule the NVR to begin recording when it the alarm is triggered.
To erase the current grid, you can select Reset along the bottom.
To save your changes, select Apply.